{"title":"Accessories and Replacement Parts","description":"\u003cp\u003eEverything you need to keep your Halloween props firing all season.\u003c\/p\u003e\n\u003cp\u003eReplacement parts and add-ons for the Dmitriy Creations controller lineup — Scare Actor Helper, Prop Activator, and Digital Eyes Kits. From extra trigger buttons to spare LCDs, this is the home for the small parts that keep your big scares running.\u003c\/p\u003e\n\u003cp\u003eWhat's in here:\u003cbr\u003e• Push \/ Step Buttons — 5 ft and 10 ft trigger cables for actors and motion zones\u003cbr\u003e• RF 433MHz Remotes — wireless triggering for hidden scare positions\u003cbr\u003e• PIR Motion Sensors — replacement and add-on sensors for prop triggering\u003cbr\u003e• Replacement LCDs — spare displays for all Digital Eyes Kits\u003cbr\u003e• Adhesive Rings — fresh mounting rings for Digital Eyes installs\u003cbr\u003e• Button Extension Cables — 16 in and 36 in extensions for Digital Eyes triggering\u003c\/p\u003e\n\u003cp\u003eAll parts made in the USA. Ships from Los Angeles. Compatible with the full Dmitriy Creations controller line.\u003c\/p\u003e","products":[{"product_id":"pir-motion-sensor-with-6ft-of-wire","title":"PIR Motion Sensor with 6ft of wire","description":"\u003cp\u003eThis \u003cstrong\u003ePIR motion sensor\u003c\/strong\u003e comes pre-wired with 6 feet of cable and housed in a custom 3D-printed case — ready to plug into the Prop Activator Controller or any DIY prop project. All three wire leads are tagged (\u003cstrong\u003eV+, G, S\u003c\/strong\u003e) for easy identification, so there's no guessing during installation.\u003c\/p\u003e\n\u003c!-- IMAGE 1: Replace src with your Shopify product image URL --\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/Motion_PIR_Sensor_c5257fef-89ef-4f0d-8c83-5c737678fa4a.png?v=1761324769\" alt=\"PIR motion sensor HC-SR501 with 6ft wire in 3D printed case\" width=\"200\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003ePIR Motion Sensor — HC-SR501 Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor:\u003c\/strong\u003e HC-SR501 passive infrared\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection Range:\u003c\/strong\u003e Up to 23 feet (7 meters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection Angle:\u003c\/strong\u003e 120°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Voltage:\u003c\/strong\u003e 4.5V–12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger Modes:\u003c\/strong\u003e Single trigger (L) \/ Repeatable trigger (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelay Time:\u003c\/strong\u003e Adjustable 0.3 sec – 5 min (onboard potentiometer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e Adjustable (onboard potentiometer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Length:\u003c\/strong\u003e 6 feet, pre-soldered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Labels:\u003c\/strong\u003e V+ (power), G (ground), S (signal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Custom 3D-printed case by DmitriyCreations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003ePIR Motion Sensor — Compatible With\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/prop-activator-controller-multi-prop-sequential-timer-controller-for-home-depot-lowes-spirit-halloween-animatronics\"\u003eProp Activator Controller\u003c\/a\u003e\u003c\/strong\u003e — plug directly into the sensor input for walk-by prop triggering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArduino \/ Raspberry Pi projects\u003c\/strong\u003e — standard 3-pin connection works with any microcontroller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Halloween props\u003c\/strong\u003e — trigger fog machines, lights, or animatronics on motion detection (controller needed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/Using_HC-SR501_PIR-Sensor.png?v=1776401331\" alt=\"PIR motion sensor HC-SR501 Adjustments and Settings\" width=\"200\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #169179; background-color: #ffffff;\"\u003eJumper on \"H\" - \u003cspan style=\"color: #000000;\"\u003ecorner Position\u003c\/span\u003e, \u003c\/span\u003e\u003cspan style=\"color: #169179; background-color: #ffffff;\"\u003eSensitivity - \u003cspan style=\"color: #000000;\"\u003e Middle Position\u003c\/span\u003e, \u003c\/span\u003e\u003cspan style=\"color: #169179; background-color: #ffffff;\"\u003eOFF Time controll - \u003cspan style=\"color: #000000;\"\u003eall the way to left (CCW)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eDemo Video\u003c\/h2\u003e\n\u003cp\u003eSee this \u003cstrong\u003ePIR motion sensor\u003c\/strong\u003e in action with the Prop Activator Controller — automatic walk-by triggering for Halloween displays.\u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; margin: 16px 0; border-radius: 8px;\"\u003e\u003ciframe style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0; border-radius: 8px;\" title=\"PIR motion sensor with Prop Activator Controller demo\" src=\"https:\/\/www.youtube.com\/embed\/fwwjeJZe6zA\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u0026gt;\u003c\/p\u003e","brand":"DmitriyCreations","offers":[{"title":"Default Title","offer_id":47228268871925,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/Motion_PIR_Sensor_c5257fef-89ef-4f0d-8c83-5c737678fa4a.png?v=1761324769"},{"product_id":"adhesive-mounting-rings-1-28-inch","title":"Adhesive Mounting Rings for 1.28\" Screens and Lenses (2-Pack)","description":"\u003cp\u003eThese \u003cstrong\u003eadhesive mounting rings\u003c\/strong\u003e are double-sided tape rings sized for the 1.28 inch (35.7mm) LCD screens and lenses used in the Digital Eyes Kit Original, V2, and Robot. Each pack includes 2 rings — enough to remount both eyes if you need to reposition or replace a screen inside your prop.\u003c\/p\u003e\n\u003c!-- IMAGE 1: Replace src with your Shopify product image URL --\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/Adhesive_rings_Double_Side_tape.jpg?v=1762211115\" alt=\"Adhesive mounting rings double-sided tape for 1.28 inch Digital Eyes Kit screens\" width=\"102\" height=\"102\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat These Rings Are For\u003c\/h2\u003e\n\u003cp\u003eEvery Digital Eyes Kit (Original, V2, and Robot) ships with \u003cstrong\u003eadhesive mounting rings\u003c\/strong\u003e pre-installed to hold the round LCD screens and lenses together. If you need to remove a screen during a build — or made a mistake during installation — the original adhesive won't restick cleanly. This spare pack gives you fresh rings to remount everything securely.\u003c\/p\u003e\n\u003ch3\u003eCommon Reasons You Need Extras\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRepositioned a screen inside a prop and the original tape lost its grip\u003c\/li\u003e\n\u003cli\u003eRemoved a lens for cleaning and need fresh adhesive to reattach\u003c\/li\u003e\n\u003cli\u003eBuilding a new prop and transferring screens from another build\u003c\/li\u003e\n\u003cli\u003eSwapped a damaged display with a replacement screen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eAdhesive Mounting Rings — Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 rings per pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 35.7mm (fits 1.28 inch round screens and lenses)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Double-sided adhesive tape ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Digital Eyes Kit Original, V2, and Robot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNot compatible with the Mini (20mm) or 2.8 Inch versions — those use different \u003cstrong\u003eadhesive mounting rings\u003c\/strong\u003e and screen sizes.\u003c\/em\u003e\u003c\/p\u003e","brand":"DmitriyCreations","offers":[{"title":"Default Title","offer_id":47228375662837,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/Adhesive_rings_Double_Side_tape.jpg?v=1762211115"},{"product_id":"36-inch-select-button-extension","title":"36 Inch SELECT Button Extension","description":"\u003cp\u003eThis \u003cstrong\u003e36 inch button extension\u003c\/strong\u003e cable gives you extra reach for the SELECT button on any Digital Eyes Kit — V2, Robot, Mini, and 2.8 Inch — ideal for large props like 12ft skeletons, ground breakers, and full-size animatronics. It also works as a miniature hiding switch for the Actor Helper Controller, a trigger for the Prop Activator Controller, and DIY projects.\u003c\/p\u003e\n\u003c!-- IMAGE 1: Replace src with your Shopify product image URL --\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/36_inch_button_extension.jpg?v=1761324087\" alt=\"36 inch button extension cable for Digital Eyes Kit SELECT button\" width=\"200\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e36 Inch SELECT Button Extension — What It Does\u003c\/h2\u003e\n\u003cp\u003eEvery Digital Eyes Kit includes a SELECT button on the controller board. On large props, that board is often mounted deep inside the body or head — far from easy access. This \u003cstrong\u003e36 inch button extension\u003c\/strong\u003e moves the button to an accessible spot so you can change eye animations without taking the prop apart. Route the cable through the frame and mount the button wherever you need it.\u003c\/p\u003e\n\u003ch3\u003eAlso Works With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActor Helper Controller\u003c\/strong\u003e — use as a miniature hiding switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Activator Controller\u003c\/strong\u003e — manual trigger or test button during setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArduino \/ Raspberry Pi\u003c\/strong\u003e — standard momentary push button with 2-pin connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny DIY prop project\u003c\/strong\u003e — a simple normally-open momentary switch on a long lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e36 Inch Button Extension — Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 36 inches (3 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton Type:\u003c\/strong\u003e Momentary push button (normally open)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e 2-pin, plugs directly into any Digital Eyes Kit SELECT header\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e All Digital Eyes Kits (V2, Robot, Mini, 2.8 Inch), Actor Helper Controller, Prop Activator Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor smaller props, the \u003ca href=\"\/products\/16-inch-select-button-extension\"\u003e16 inch button extension\u003c\/a\u003e is also available. Choose the \u003cstrong\u003e36 inch button extension\u003c\/strong\u003e when your controller board is more than a foot from the nearest access point.\u003c\/p\u003e","brand":"DmitriyCreations","offers":[{"title":"Default Title","offer_id":47228380053749,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/36_inch_button_extension.jpg?v=1761324087"},{"product_id":"16-inch-select-button-extension","title":"16 Inch SELECT button Extension","description":"\u003cp\u003eThis \u003cstrong\u003e16 inch SELECT button extension\u003c\/strong\u003e cable adds reach to the SELECT button on any Digital Eyes Kit — V2, Robot, Mini, and 2.8 Inch — so you can switch eye animations without opening your prop. It also works as a miniature hiding switch for the Actor Helper Controller, a trigger for the Prop Activator Controller, and other DIY projects.\u003c\/p\u003e\n\u003c!-- IMAGE 1: Replace src with your Shopify product image URL --\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/16_inch_Select_button_Extension.jpg?v=1761323609\" alt=\"SELECT button extension cable for Digital Eyes Kit with 2-pin connector\" width=\"200\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e16 Inch SELECT Button Extension — What It Does\u003c\/h2\u003e\n\u003cp\u003eEvery Digital Eyes Kit includes a SELECT button on the controller board — usually buried inside a prop. This extension cable moves the button outside the prop so you can change eyes without disassembly. Route the cable through a small hole and mount the button wherever you can reach it.\u003c\/p\u003e\n\u003ch3\u003eAlso Works With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActor Helper Controller\u003c\/strong\u003e — use as a miniature hiding switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProp Activator Controller\u003c\/strong\u003e — manual trigger or test button during setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArduino \/ Raspberry Pi\u003c\/strong\u003e — standard momentary push button with 2-pin connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny DIY prop project\u003c\/strong\u003e — a simple normally-open momentary switch on a long lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e16 Inch Button Extension — Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButton Type:\u003c\/strong\u003e Momentary push button (normally open)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e 2-pin, plugs directly into any Digital Eyes Kit SELECT header\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e All Digital Eyes Kits (V2, Robot, Mini, 2.8 Inch), Actor Helper Controller, Prop Activator Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed more reach? The \u003ca href=\"\/products\/36-inch-select-button-extension\"\u003e36 inch version\u003c\/a\u003e is also available. The \u003cstrong\u003e16 inch button extension\u003c\/strong\u003e is the right choice when your controller is within arm's reach of an access point.\u003c\/p\u003e","brand":"DmitriyCreations","offers":[{"title":"Default Title","offer_id":47272700707061,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/16_inch_Select_button_Extension.jpg?v=1761323609"},{"product_id":"replacement-tft-display-1-28-inch","title":"1.28 Inch Replacement TFT display for Original, V2 and Robot Digital eyes kits","description":"\u003cp\u003eThis \u003cstrong\u003e1.28 inch replacement TFT display\u003c\/strong\u003e is a direct drop-in screen for the Digital Eyes Kit Original, V2, and Robot. If your screen was cracked during installation, damaged inside a prop, or stopped displaying animations, this replacement screen gets your kit working again — no soldering or reprogramming needed.\u003c\/p\u003e\n\u003c!-- IMAGE 1: Replace src with your Shopify product image URL --\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/YOUR-IMAGE-1.jpg\" alt=\"1.28 inch replacement TFT display screen for Digital Eyes Kit Original and V2\" width=\"600\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e1.28 Inch Replacement TFT Display — Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis screen is compatible with three Digital Eyes Kit versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Eyes Kit Original\u003c\/strong\u003e — 1.28 inch (35.7mm) round LCD, single animated eye style\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Eyes Kit V2\u003c\/strong\u003e — 1.28 inch (35.7mm) round LCD, 5 switchable animated eye styles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Eyes Kit Robot\u003c\/strong\u003e — 1.28 inch (35.7mm) round LCD for cosplay helmets, robots, and custom builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNot compatible with the Mini (20mm) or 2.8 Inch versions — those use a different screen size, Connector. and Controller\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWhen You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eScreen cracked or scratched during prop build or handling\u003c\/li\u003e\n\u003cli\u003eDisplay stopped powering on or showing eye animations\u003c\/li\u003e\n\u003cli\u003eDamaged ribbon cable from repeated removal and reinstallation\u003c\/li\u003e\n\u003cli\u003eBuilding a spare kit or backup unit for haunt season\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eReplacement TFT Display — Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen Size:\u003c\/strong\u003e 1.28 inches (round)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TFT LCD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Digital Eyes Kit Original, V2, and Robot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Pre-wired ribbon cable — plugs directly into the controller board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- IMAGE 2: Replace src with your Shopify product image URL --\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/YOUR-IMAGE-2.jpg\" alt=\"Replacement TFT display 1.28 inch round screen with ribbon cable connector\" width=\"600\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eHow to Install the Replacement TFT Display\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePower off your Digital Eyes Kit and disconnect the USB cable\u003c\/li\u003e\n\u003cli\u003eGently unplug the old screen's ribbon cable from the controller board\u003c\/li\u003e\n\u003cli\u003eConnect the new \u003cstrong\u003ereplacement TFT display\u003c\/strong\u003e cable to the same port\u003c\/li\u003e\n\u003cli\u003ePower the kit back on — animated eyes appear immediately, no setup needed\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cem\u003eNo tools, no soldering, no reprogramming. Plug in and go.\u003c\/em\u003e\u003c\/p\u003e","brand":"DmitriyCreations","offers":[{"title":"Default Title","offer_id":47597660766453,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/Screenshot2026-02-07212500.png?v=1770528333"},{"product_id":"replacement-tft-display-2-8-inch","title":"2.8 Inch Replacement TFT display , for 2.8 inch Digital eyes kit","description":"\u003cp\u003eThis \u003cstrong\u003ereplacement TFT display\u003c\/strong\u003e is a direct drop-in screen for the Digital Eyes Kit 2.8 Inch. If your original display was damaged during installation, cracked in a prop build, or stopped working after heavy use, this replacement screen gets your animated eyes back up and running — no resoldering or reprogramming required.\u003c\/p\u003e\n\u003c!-- IMAGE 1: Replace src with your Shopify product image URL --\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/YOUR-IMAGE-1.jpg\" alt=\"2.8 inch replacement TFT display screen for Digital Eyes Kit\" width=\"600\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eReplacement TFT Display — Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis 2.8 inch screen is designed specifically for the \u003cstrong\u003eDigital Eyes Kit 2.8 Inch\u003c\/strong\u003e version. It is not compatible with the Original (1.3\"), V2 (1.3\"), Robot (35.7mm round), or Mini (20mm) kits — each version uses a different display size and connector.\u003c\/p\u003e\n\u003ch3\u003eWhen You Need a Replacement\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eScreen cracked or scratched during prop installation or handling\u003c\/li\u003e\n\u003cli\u003eDisplay stopped powering on or showing animations\u003c\/li\u003e\n\u003cli\u003eBuilding a multi-head prop and need extra screens\u003c\/li\u003e\n\u003cli\u003eDamaged ribbon cable or connector from repeated removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eReplacement TFT Display — Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen Size:\u003c\/strong\u003e 2.8 inches (diagonal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TFT LCD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible With:\u003c\/strong\u003e Digital Eyes Kit 2.8 Inch only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Pre-wired ribbon cable — plug directly into the controller board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.0 oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- IMAGE 2: Replace src with your Shopify product image URL --\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/YOUR-IMAGE-2.jpg\" alt=\"Replacement TFT display size comparison next to Digital Eyes Kit controller board\" width=\"600\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eHow to Install the Replacement TFT Display\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePower off your Digital Eyes Kit and disconnect the USB cable\u003c\/li\u003e\n\u003cli\u003eGently unplug the damaged display's ribbon cable from the controller board\u003c\/li\u003e\n\u003cli\u003eConnect the new \u003cstrong\u003ereplacement TFT display\u003c\/strong\u003e ribbon cable to the same port\u003c\/li\u003e\n\u003cli\u003ePower the kit back on — the new screen will display animated eyes immediately with no setup needed\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cem\u003eNo tools, no soldering, no reprogramming. Plug in and go.\u003c\/em\u003e\u003c\/p\u003e","brand":"DmitriyCreations","offers":[{"title":"Default Title","offer_id":47599045935349,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/Screenshot2026-02-08193209.png?v=1770608110"},{"product_id":"push-step-button-trigger","title":"Push \/ Step Button — Pre-Wired Trigger for Actor Helper \u0026 Prop Activator Controllers","description":"\u003cp\u003eHeavy-duty pre-wired push\/step button — the same trigger button that ships with every Actor Helper Controller kit. Sold separately as a replacement, an add-on for the second trigger input, or a stand-alone trigger for the Prop Activator Controller.\u003c\/p\u003e\n\u003ch3\u003eUse it as:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA second trigger for your Actor Helper Controller\u003c\/strong\u003e — plug into the open trigger port 2 and run a two-actor scene from one controller. One button on each side of the prop. Or give one actor the freedom to fire the scare from two positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA trigger for your Prop Activator Controller\u003c\/strong\u003e — fire any prop sequence on demand instead of waiting for motion detection. Useful for staged scares, photo-op props, and manual cues during a walk-through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA replacement\u003c\/strong\u003e — if your original button gets damaged or worn out after a season of heavy use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMomentary push\/step button — press to trigger, release to reset\u003c\/li\u003e\n\u003cli\u003eRugged enclosure — designed for floor-mount step-on activation or wall-mount push activation\u003c\/li\u003e\n\u003cli\u003ePre-wired plug — screws straight into the trigger port, no soldering needed\u003c\/li\u003e\n\u003cli\u003ePre-wired cord — choose 5ft or 10ft at checkout\u003c\/li\u003e\n\u003cli\u003eCompatible with: Actor Helper Controller, Prop Activator Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your cord length\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5ft pre-wired cord\u003c\/strong\u003e — $15 — standard length, perfect for most setups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10ft pre-wired cord\u003c\/strong\u003e — $20 — for spread-out two-actor scenes or when the controller sits farther from the trigger spot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× Push\/Step Button with pre-wired cord (5ft or 10ft as selected)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt and tested in Los Angeles.\u003c\/strong\u003e\u003c\/p\u003e","brand":"DmitriyCreations","offers":[{"title":"5ft Cord","offer_id":48205111558389,"sku":"PSB-5FT","price":15.0,"currency_code":"USD","in_stock":true},{"title":"10ft Cord","offer_id":48205111591157,"sku":"PSB-10FT","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/Push_Step_Button.jpg?v=1779944957"},{"product_id":"rf-433mhz-remote-control","title":"433MHz RF Wireless Remote — Hands-Free Trigger for Actor Helper \u0026 Prop Activator Controllers","description":"\u003cdiv style=\"background: #0E0E10; color: #faf7f2; padding: 18px 20px; margin: 0 0 20px 0; border-radius: 6px; font-size: 15px; line-height: 1.55;\"\u003e\n\u003cstrong style=\"font-size: 17px; color: #e8651c;\"\u003e▶ Watch the 2-minute pairing tutorial\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eStep-by-step video walkthrough showing exactly how to pair this remote with the Actor Helper or Prop Activator Controller — including troubleshooting tips.\u003cbr\u003e\u003cbr\u003e\u003ca style=\"display: inline-block; background: #E8651C; color: #faf7f2; padding: 10px 22px; text-decoration: none; font-weight: 600; border-radius: 4px; font-size: 15px;\" href=\"https:\/\/www.youtube.com\/watch?v=a0QAq6sKViQ\"\u003eWatch the Tutorial →\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cp\u003e433MHz RF wireless remote — the same hands-free trigger that ships with every Actor Helper Controller. Sold separately as a replacement, an add-on for the Prop Activator Controller, or a secondary remote so multiple actors can trigger the same prop or Controller from different positions.\u003c\/p\u003e\n\u003ch3\u003eUse it as:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA second remote for your Actor Helper Controller\u003c\/strong\u003e — pair multiple remotes so each actor in a haunt can fire the same scare from anywhere on set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA wireless trigger for your Prop Activator Controller\u003c\/strong\u003e — fire any prop sequence remotely without running pushbutton cables across your scene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA replacement\u003c\/strong\u003e — if your original remote gets lost or damaged during heavy haunt use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA standby spare\u003c\/strong\u003e — keep one in your kit bag so a dropped remote doesn't take down your scene.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 433MHz\u003c\/li\u003e\n\u003cli\u003eEffective range: up to 30+ feet line-of-sight, less through walls\u003c\/li\u003e\n\u003cli\u003eBattery: CR2032 coin cell (included for US orders; supplied separately for international orders — widely available at any pharmacy)\u003c\/li\u003e\n\u003cli\u003eCompatible with: Actor Helper Controller (all variants) and Prop Activator Controller\u003c\/li\u003e\n\u003cli\u003eMultiple remotes can be paired to a single controller\u003c\/li\u003e\n\u003cli\u003ePairing is permanent until cleared — does not need to be re-paired between sessions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow pairing works\u003c\/h3\u003e\n\u003cp\u003ePairing takes about 30 seconds. Put your controller into pairing mode - press the button on the \u003cstrong\u003ereceiver\u003c\/strong\u003e, will blink 3 times than steady led. Press the button on the \u003cstrong\u003eremote\u003c\/strong\u003e, and the controller locks in the remote ID. Full step-by-step walkthrough in the video tutorial above.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× 433MHz RF Remote\u003c\/li\u003e\n\u003cli\u003e1× CR2032 battery (US orders only — international orders ship without battery per shipping regulations; replacement CR2032 widely available at any local store)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt and tested in Los Angeles.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"background: #FFF4E6; border-left: 4px solid #E8651C; padding: 14px 18px; margin: 18px 0; font-size: 14px;\"\u003e\n\u003cstrong\u003eAlready own an Actor Helper Controller?\u003c\/strong\u003e A 433MHz remote already came included with your kit. This listing is for a \u003cem\u003esecond\u003c\/em\u003e or \u003cem\u003ereplacement\u003c\/em\u003e remote.\u003c\/div\u003e","brand":"DmitriyCreations","offers":[{"title":"Default Title","offer_id":48209611456757,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5925\/5797\/files\/Remote_Control_RF_433_Mhz.jpg?v=1779944600"}],"url":"https:\/\/www.dmitriycreations.com\/collections\/accessories-and-replacement-parts.oembed","provider":"DmitriyCreations","version":"1.0","type":"link"}