DmitriyCreations
Scare Actor Helper Controller – Pre-Recorded Audio Trigger with Strobe Light, RF Remote & Relay | Haunted Attraction, Halloween Maze, Theme Park, Theater
Scare Actor Helper Controller – Pre-Recorded Audio Trigger with Strobe Light, RF Remote & Relay | Haunted Attraction, Halloween Maze, Theme Park, Theater
Couldn't load pickup availability
The Actor Helper Controller is a professional-grade scare actor audio controller built for haunted house actors, jump-scare performers, and theatrical performers who need reliable, hands-free sound effects — activated at the push of a button or the click of a remote. Stop straining your voice. Start scaring smarter.
Load your custom screams, roars, laugh tracks, or any theatrical audio onto the Actor Helper Controller. Mount the included push button on the wall, drop a step-pad on the floor, or trigger from across the room with the included 433 MHz RF remote. Your audio fires — every single time — so you can focus on the performance, not your voice.
Used in haunted attractions, Halloween mazes, theme parks, scare zones, escape rooms, and theatrical productions.
What's Included with the Actor Helper Controller
- Controller unit (main board)
- 12V 3A power supply (pre-wired)
- Push button with pre-wired 5 ft cord (wall or floor mountable)
- 433 MHz RF wireless remote control
- 20W LED lamp with pre-wired 9 ft cord
- Small screwdriver
- 128 MB Micro SD card included with SD version
Actor Helper Controller Play Modes — Full Control Over Every Trigger
Mode 1 – Play to End
Press once and the audio plays all the way through — cannot be interrupted by pressing again. The Actor Helper Controller automatically advances to the next file when done. Perfect for set-and-forget scare sequences.
Mode 2 – Push Play / Push Stop
Press to start, press again to stop. Full actor control over when audio starts and ends.
Mode 3 – Push & Hold
Audio plays while you hold the button. Releases the moment you let go — ideal for growl or ambient effects tied to performer movement.
After each clip finishes, the Actor Helper Controller automatically advances to the next audio file in the queue. If only one file is loaded, it resets and is ready for the next trigger activation.
Built-in Strobe Light — 3 Programmable Modes
- Variable Frequency Strobe — adjustable from 2 Hz to 35 Hz using the onboard potentiometer
- Constant On — steady light that stays on while audio plays
- Random Flash Sequence — pre-programmed unpredictable flash pattern for a more realistic haunt effect
The Actor Helper Controller saves strobe settings to onboard memory — your configuration survives power cycles with zero reprogramming.
Actor Helper Controller Audio Formats & Storage
- Supports MP3 and WAV audio files
- Load audio via USB-C port — plug in, drag and drop, done
- Playback order follows copy order — first file copied plays first
Available in two versions:
- 4 MB Internal Memory — ideal for a few short clips or a single scare sequence
- 128 MB SD Card Version — includes Micro SD card, holds hours of audio for complex haunted attraction setups
Actor Helper Controller Outputs & Relay
- 3.5mm Line Out (Mono) — connect to any amplifier or powered speaker
- RCA Left & Right (Mono) — dual output for amplifier connection
- Onboard Relay (Normally Open) — activates automatically when audio plays; trigger fog machines, external lights, strobe accessories, or any compatible haunted house prop
- 20W LED Lamp — pre-wired 9 ft cord, activates with audio
- 2 Trigger Inputs — connect two separate push buttons; ideal for scare actors who move between positions in a haunt maze or scare zone
Note: An amplifier or powered/amplified speakers are required. The Actor Helper Controller outputs line-level audio only.
Easy Setup — Get Your Actor Helper Controller Running in Minutes
- Hold the SETUP button and plug in the 12V adapter
- Rotate the potentiometer left to right to select your strobe mode and frequency
- Release the SETUP button — settings save automatically to onboard memory
- Select your play mode with the MODE switch (1, 2, or 3)
- Load your audio files via USB-C
- Mount your push button trigger, plug in your speaker, and you're ready to scare
📄 Download Actor Helper Controller User Manual (PDF)
Status LEDs
Four onboard LEDs let you monitor the Actor Helper Controller at a glance:
- 12V LED — controller power
- 5V LED — internal logic power
- Strobe LED — strobe output activity
- Relay LED — relay activation status
Actor Helper Controller Technical Specifications
- Power: 12V DC, 3A (included)
- Trigger Inputs: 2× (push button, step pad, or compatible trigger)
- RF Remote: 433 MHz (included)
- Audio Formats: MP3, WAV
- Storage: 4 MB internal / 128 MB Micro SD (SD version)
- Audio Upload: USB-C
- Audio Outputs: 3.5mm mono line out, RCA L/R mono
- Strobe: Adjustable 2–35 Hz, constant on, or random sequence
- Relay: Normally Open (NO) — activates on audio playback
- LED Lamp: 20W, 9 ft pre-wired cord
Who Uses the Actor Helper Controller
- Haunted House & Halloween Maze Actors — fire roars, screams, and jump-scare sounds without saying a word; save your voice for a full-season run
- Theme Park & Scare Zone Performers — consistent audio every trigger, no voice fatigue after long shifts
- Theatrical & Stage Performers — trigger pre-recorded theatrical audio on cue, completely hands-free
- Escape Room Designers — add timed or push-button audio elements to any room build
- Haunt Prop Builders — use the Actor Helper Controller onboard relay to sync fog machines, lighting rigs, or external props to audio playback automatically
Let customers speak for us
Excellent digital eyes makes my horror mask come to life
Best thing to have especially if you have multiple animatronics I set this up in my hobby room with my home depot starwars animatronics works great the remote is a must I can set durations for each hit the button and it’s awesome
So easy to use. Works great. awesome product
I like my multi-prop controller. It works great and is easy to use. I would buy again if needed.
Thanks again and keep coming up with great Halloween products.
The prop activator works great and Dmitriy was very helpful.
We use it for our Christmas Disney characters. It works perfectly!
Excellent product and super fast order processing and shiping from the US to the UK. Really fun product that will hopefully entertain for years to come. Thanks!
Tolle Ware und ein sehr guter Verkäufer!
Vielen Dank.
Erik
Awesome little timers at a great price
Look awesome, had a little issue with the install and I cracked one of the lenses. They were able to get me a replacement pretty quick
The kit was delivered within a few days of making the order. The kit came packaged well in a small box with everything needed to build the kit. When I had questions they were answered the very next day on two separate occasions. The eyes look fantastic. I built a prop as part of a Halloween costume and was the hit of the party.
Gives my skeletons that extra cool factor. Easy to setup and install.
Loved the digital eye kits, delivery time was quick. Will definitely order again.
Love it. Would definitely buy again.
Quick delivery, easy installation. I love the fact that I can change which eyes display. I have only 2 wishes... and these are personal wishes. NOT complaints:
1) That there were some creepier, slightly scarier eyes to choose from but the seller DOES say that he will work with you;
2) Perhaps a way to make them battery operated...I plan to use these eyes in a skull as a ghoulish conduit in a seance. My ghoulish seance creature has cute blue eyes and are battery operated. I would like to buy another of these eyes to place in my ghoul head next year. Just a thought!