36 Inch SELECT Button Extension

This 36 inch button extension cable gives you extra reach for the SELECT button on any Digital Eyes Kit — V2, Robot, Mini, and 2.8 Inch — ideal for large props like 12ft skeletons, ground breakers, and full-size animatronics. It also works as a miniature hiding switch for the Actor Helper Controller, a trigger for the Prop Activator Controller, and DIY projects.

36 Inch SELECT Button Extension — What It Does

Every Digital Eyes Kit includes a SELECT button on the controller board. On large props, that board is often mounted deep inside the body or head — far from easy access. This 36 inch button extension moves the button to an accessible spot so you can change eye animations without taking the prop apart. Route the cable through the frame and mount the button wherever you need it.

Also Works With

• Actor Helper Controller — use as a miniature hiding switch
• Prop Activator Controller — manual trigger or test button during setup
• Arduino / Raspberry Pi — standard momentary push button with 2-pin connector
• Any DIY prop project — a simple normally-open momentary switch on a long lead

36 Inch Button Extension — Specs

• Cable Length: 36 inches (3 feet)
• Button Type: Momentary push button (normally open)
• Connector: 2-pin, plugs directly into any Digital Eyes Kit SELECT header
• Compatible With: All Digital Eyes Kits (V2, Robot, Mini, 2.8 Inch), Actor Helper Controller, Prop Activator Controller

For smaller props, the 16 inch button extension is also available. Choose the 36 inch button extension when your controller board is more than a foot from the nearest access point.